ESE / GATE / PSUs Numerical Ability, Theory & self practice questions
The study material for Numerical Ability is thoroughly revised this year to meet the requirements of all categories of students. It consists of
(i) Brief synopsis covering the entire syllabus
(ii) Worked out examples, concept wise
(iii) Practice questions with detailed solutions
The students are advised to go through the theory duly understanding the worked out examples to the extent possible and practice the questions, By doing so, the students will get familiarized with some of the concepts and can really enjoy the lecture in the class. Also, the students can interact with the faculty in a better way.
After attending the classes and understanding the typical questions explained by the professors, the students will be in a position to solve these questions in work book. However, for verifying the correctness, Hints/solutions are also given wherever required. The student is advised to struggle to get the solution for the problems in the work book by self analysis and not to refer the solution first.
Thanks to all Professors who extended their services in the preparation of this booklet.
It is believed that this volume is also a valuable aid to the students appearing for competitive exams like ESE, ISRO, State and Central Commissions and other PSUs.
ESE-2021 General Studies & Engineering Aptitude Previous Objective Questions with Solutions, Subject wise (2017-2020)
ESE-2021 UPSC Preliminary Examination Civil Engineering Objective Volume 2
Features of the Book
- Contains previous questions with solutions from 1992 onward
- All questions are segregated Subject-wise & Chapter-wise
- On point, clear & error free solutions to questions
- Thoroughly updated & revised
The Stage-I (Prelims) of ESE consists of two objective papers. Paper-I contains General Studies & Engineering Aptitude. Paper-II contains Civil Engineering Subjects. In stage-II (Mains), the technical syllabus is divided into two papers.
The Volume Contains Objective Questions of the Following Subjects :
- Fluid Mechanics & Hydraulic Machines
- Hydrology
- Irrigation Engineering
- Environmental Engineering
- Geo technical Engineering
- Surveying
- Geology
- Transportation Engineering
The style, quality and content of the Solutions for previous ESE Questions of Civil Engineering, will encourage the reader, especially the student whether above average, average or below average to learn the concept and answer the question in the subject without any tension. However it is the reader who should conform this and any comments and suggestions would be pleasantly received.
Note : It is observed that majority of ESE objective questions are being asked as it is in many PSUs, state service commission, state electricity boards and even in GATE exam. Hence we strongly recommend all students who are competing for various competitive exams to use this book according to the syllabus of the exam concerned. This book can also be used by new Teachers in engineering colleges to improve their Concepts.
ESE-2021 UPSC Preliminary Examination Civil Engineering Objective: Volume 1
25% Discount + Free Shipping
Offer price: 525.00 ₨
Actual Price(MRP): 700.00 ₨
Discount: 175.00 ₨
ESE 2020 Prelims Energy & Environment
The role of energy has been assuming increasing significance in recent times with the growing concern for the country’s energy security. The book attempts to make analytical observations that are relevant covering various aspects and is immensely helpful for various UPSC, Engineering and State Level Examinations.
Understanding the concepts of environment, policies and programmes of the government relating to conservation, sustainable development etc. play a vital role in preparing for the new pattern of the exam. The concepts of below topics are covered:
- Energy
- Basics of Environment
- Conservation
- Climate Change
- Degradation
- Pollution
- Environmental Impact Assessment
- Miscellaneous
Practice Questions are hand-picked from various UPSC exams and are given at the end of every chapter which will test the understanding of the concepts.
The concepts and questions are prepared keeping in view the model paper, prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. Suggestions by the readers are invited for the improvement in our future editions.
The students are also advised to solve the previous ESE questions so that they can understand the pattern of questions for better preparation.
ESE 2020 Social, Economic And Industrial Development
This book is intended to help Engineering Services aspirants to understand the background concepts pertaining to Social, Economic and Industrial development.
The methodical approach used to conceptualize the background idea makes this book immensely helpful for all ambitious engineering students, not only for nurturing informative skills but also to give a holistic perspective.
Considering the new pattern of the examination, basics of Microeconomics concepts have also been introduced in this book.
ESE-2020 Prelims Basics of Project Management
₹ 100This book is intended to help students to prepare for the topic ‘Basics of Project Management’, included as part of General Studies and Engineering Aptitude for ESE.
Project Management is the application of knowledge, skills, tools and techniques applied to project activities in order to meet the project requirements. It is an organized venture for managing projects, involving scientific application of modern tools and techniques in planning, financing, implementing, monitoring, controlling and coordinating unique activities or takes to produce desirable outputs in accordance with the determined objectives within the constraints of time and cost.
The topics covered under this subject will give a clear-cut picture about project life-cycle and various phases of the project management. The project management tools and techniques are presented in the detailed manner, so that an engineering graduate can understand the applications of various tools and techniques.
The students are also advised to solve the previous ESE Questions so that they can understand the pattern of questions for better preparation.
The concepts and questions are prepared keeping in view the model paper, prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. Suggestions by the readers are invited for the improvement in our future editions.
ESE-2020 Prelims Ethics & Values in Engineering Profession
₹ 100While Engineering Marvels make lives of people better, accidents and disasters pose challenges to engineers in edition to affecting the public. A deeper investigations of these mishaps leads to pointing the finger on the conduct of engineers, their inability to either identify or resolve the identified moral issues in an appropriate manner. While sometime this inability can be traced to incompetence, majority of the times it turns out to be the pressure by the management whose priorities differ from that of the professional engineers. The engineer is pressed to handle these two factors along with his/her own ignorance or arrogance, to make sure that public is not victimized.
Therefore, there is a need to expose the engineering students to the ethical considerations of engineering problems in edition to the technologies and standards taught in engineering education. While curriculum focuses on external engineering aspects in terms of meeting standards, facilitating practice of ethical conduct focuses on inner engineering and inculcates and nurtures the sense of responsibility and accountability in the engineering graduates. This further promotes integrity in the qualified engineers to conduct profession in the most ethical manner. This dimension of engineering education that gives inputs on the ‘third dimension’ of engineering, viz., values of engineering profession can be termed as engineering aptitude.
This third edition is next step in pursuit of excellence in making the content further more relevant, comprehensive that can catalyze the performance of the candidates in the UPSC examination. Redundancy is at its minimum by way of providing all the relevant information in one place in this edition. Context fitting examples, illustrations, case studies and pictorial representation of some abstract concepts are some of the hallmarks incorporated in this edition.
Some of the case studies and illustrations that were discussed in the classrooms have been incorporated in this book with the aim of making these discussions available to the candidates who cannot make it to classrooms. Authors are of the firm conviction that students would enjoy not only reading this new book but also content relevant practice questions included in the career. This edition is markedly different from previous editions with content relevant practice questions included in the appropriate places. Another deviation of this edition from previous editions is inclusion of previous ESE questions.
ESE-2020 Prelims General Principles of Design, Drawing, Importance of Safety
A product may be anything from a software product to Mechanical, Civil, Electrical, Electronics or any other. Every Engineering student should know the various steps involved in the design process right from identification of customer requirement to product launch. Engineering Drawing is the communication to transfer the design content to manufacturing team. Everyday in the news papers we are seeing, how the workers/stake holders are suffering due to violation/ignorance of safety norms. We have to appreciate the initiative taken by the UPSC in this regard so that the engineers will have some basic knowledge of design drawing and safety.
The concepts and questions are presented keeping in view the model paper, prelims paper of ESE 2017 & ESE 2018 by the UPSC.
ESE-2020 Prelims Information & Communication Technologies
This Book is intended to help students to prepare for the topic Information communication Technologies’ included as part of general studies and engineering Aptitude for ESE revised Pattern.
ICT is the technology required for information processing in particular, the use of electronic computers, communication devices and software applications to convert, store, protect, process, transmit and retrieve information from anywhere anytime.
To understand ICT, we have to understand basics of concepts (chapter 1).
How to transfer information from one place to another (chapter 2) and it’s security.
Information can be transferred in several ways. Radio, television, cellular technology (chapter 3) and satellite communication (chapter 4)
Appropriate governance is key to the successful (and cost effective) development of technology within any organisation. (Chapter -5)
ICT in education is any technology that deals with the exchange of information or in other words communication in the teaching learning process. i.e.., Technology Based Education (chapter -6)
The concepts and question are prepared keeping in view the model paper released by the UPSC for revised pattern of ESE . Suggestions by the readers are invited for the improvement in our future editions.
ESE-2020 Prelims Standards & Quality Practices in Production, construction, Maintenance and Services
The key factors that are responsible for survival and performance excellence of any industry are customer satisfaction and return on the capital invested. This applies to both manufacturing and service sectors. To avoid intra country and inter country comparisons for products in the market, there arises a need for uniformity in standards, established codes and procedures for meeting customer expectations. Hence the standards and quality practices play an important role. For this requirement to be met ISO is ensuring equality in the standards of products and services.
ISO is striving relentlessly to institute quality policies to shape the behavior and establish core values in an organisation and therefore contribute to corporate policy, control charts. Acceptance sampling systems, continuous improvement techniques are used by every organisation throughout the world to improve product quality service quality and reduce cost. The most effective use of these techniques depends upon they being understood by production and inspection supervisors by engineers and by managements.
Rules and regulations for improving quality in all disciplines was documented by quality guru’s in the quality philosophers, which are advocated through out the world.
We tired our level best to give the best possible theory with relevant objective questions to help the student in their ESE preparation.
We welcome the suggestions by readers with respect to content and questions.