ESE 2019 Prelims Basics of Materials Science & Engineering (For UPSC Engineering Services) This Book is intended to help students to prepare for the topic ‘Basics of material science and Engineering’, included as part of General Studies and Engineering Aptitude for ESE revised pattern. The topic covered give a comprehensive understanding on Crystal structures of materials, Electrical materials, Dielectric materials, Magnetic materials, Nano Materials, Nuclear Materials and Composite Materials. The Testing of Materials including Non-Destructive Testing methods are incorporated. Some recently developed materials are also added to understand the current scenario of newly developed materials such as polymer concrete, Graphene Aero gel etc. The students are also advised to solve the previous ESE Questions so that they can understand the pattern of questions for better preparation. The concepts and questions are prepared keeping in view the model paper, prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. suggestions by the readers are invited for the improvement in our future editions.
I would like to welcome you all to yet another noteworthy effort by ACE Engineering Publications for Engineering Services aspirants to learn, understand and appreciate the subject Energy and Environment.
The role of energy has been assuming increasing significance in recent times with the growing concern for the country’s energy security. The book attempts to make analytical observations that are relevant covering various aspects and is immensely helpful for various UPSC, Engineering and State Level Examinations.
The year 2015 witnessed two landmark international events: the historic climate change agreement under UNFCCC in paris and the adoption of Sustainable Development Goals. On the domestic front, India continued to take ambitious targets in its actions against climate change. Understanding the concepts of environment, policies and programmers of the government relating to conservation, sustainable development etc. Play a vital role in preparing for the new pattern of the exam.
Practice Questions are hand-picked from various UPSC exams and are given at the end of every chapter which will test the understanding of the concepts.
The students are also advised to solve the previous ESE Questions so that they can understand the pattern of questions for better preparation for better preparation.
The concepts and questions are prepared keeping in view the model paper, prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. Suggestions by the readers are invited for the improvement in our future editions.
With best wishes to all the students
This book is intended to help Engineering Services aspirants to understand the background concepts pertaining to social, Economic and Industrial development. The methodical approach used to conceptualise the background idea makes this book immensely helpful for all ambitious engineering students, not only for nurturing informative skills but also to give a holistic perspective.
Considering the new pattern of the examination basics of Microeconomic concepts have also been introduced for the first time in this book.
I extend my gratitude to all the subject experts who have put in their valuable inputs and suggestions to make this book a complete guide for students.
ESE-2019 General Studies And Engineering Aptitude Previous Years Objective Questions with Solutions, Subject wise (2017-2018)₹ 150
Engineering Services is one of the most prestigious examinations conducted in the country for recruitment of engineers in various Central Government Organisations. The depth and Breath of subject knowledge needed to perform in ESE definitely cut above compared to other similar examinations conducted by any agency that recruits engineers. Nature of work of engineers entering services through ESE involves timely application of both technical and managerial skills. Questions in ESE test the candidates not only in fundamentals but also the ability for application of concepts in a wider aspect. Therefore the candidate who intends to crack ESE shall have to be double edged in terms of being strong in fundamental concepts and a certain definite levels of application of the concepts as well. This demand makes success in ESE more challenging.
In the latest pattern of examination of ESE, the scope of preparation has extended to engineering Aptitude in addition to the engineering learned in the college. This round has become crucial for moving to the next round since ranking in ESE includes performance in all rounds now. An aspiring candidate is now demanded to prepare not just in engineering aspects of the subject. In addition, one has to prepare well in the approach to solving the problems, which is termed the Engineering aptitude, for a maximum of 200 marks. This approach to engineering tests the candidates in a range of subjects that includes essential mathematical approach, desirable characteristic tarits as engineers through professional ethics, skills using information communication technologies, Design for safety, Environmental concerns, among others.
Since the UPSC has changed the pattern of examination effective from 2017, aspiring candidates have been investing more time and effort to find a single point source for strategic preparation in Engineering aptitude paper which can decide who makes it to further rounds of tests in ESE. This paper can work as filter to make it to the next round apart from contributing to one’s overall rank and merit. However, candidates were handicapped by non availability of such a source of material for effective preparation in this part of ESE. ACE engineering Academy, the leader and pioneer in contributing to the success of students, very well understands its responsibility and commitment to the aspirants and has come out with this book in the form of a centralised source and repository for focused and improved approach to the preparation for ESE . Candidates would find it highly useful in giving them proper direction in preparing for ESE in a more effective manner and saves a lot of search time for resources. Question that appeared 2017 and 2018 requirement examinations in ESE are collected subject – wise, compiled and solved with detailed examination for the benefit of the reader.
The publishers are of the firm conviction that this book serves the primary purpose it is intended for. The book is made to be as general as possible, so that it helps preparation for many other similar national level and state level competitive examinations. At the same time, measures are taken not to miss out the purpose for which this book is printed. This book is an outcome of wide and deep knowledge of the professors and the hard work of any support personnel of ACE family.
With Best wishes to all those who wish to go through the following pages.
This book is intended to help students to prepare for the topic ‘Basics of Project Management’, Included as part of General Studies and Engineering Aptitude for ESE revised pattern.
Project Management is the application of knowledge, skills, tools and techniques applied to project activities in order to meet the project requirements. It is an organized venture for managing projects, involving scientific application of modern tools and techniques in planning, financing, implementing, monitoring, controlling and coordinating unique activities or takes to produce desirable outputs in accordance with the determined objectives within the constraints of time and cost.
The topics covered under this subject will give a clear-cut picture about project lifecycle and various phases of the project management. The project management tools and techniques are presented in the detailed manner, so that an engineering graduate can understand the applications of various tools and techniques.
The students are also advised to solve the previous ESE Questions so that they can understand the pattern of questions for better preparation.
He concepts and questions are prepared keeping in view the model paper, prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. Suggestions by the readers are invited for the improvement in our future editions.
While Engineering Marvels make lives of people better, accidents and disasters pose challenges to engineers in edition to affecting the public. A deeper investigations of these mishaps leads to pointing the finger on the conduct of engineers, their inability to either identify or resolve the identified moral issues in an appropriate manner. While sometime this inability can be traced to incompetence, majority of the times it turns out to be the pressure by the management whose priorities differ from that of the professional engineers. The engineer is pressed to handle these two factors along with his/her own ignorance or arrogance, to make sure that public is not victimized.
Therefore, there is a need to expose the engineering students to the ethical considerations of engineering problems in edition to the technologies and standards taught in engineering education. While curriculum focuses on external engineering aspects in terms of meeting standards, facilitating practice of ethical conduct focuses on inner engineering and inculcates and nurtures the sense of responsibility and accountability in the engineering graduates. This further promotes integrity in the qualified engineers to conduct profession in the most ethical manner. This dimension of engineering education that gives inputs on the ‘third dimension’ of engineering, viz., values of engineering profession can be termed as engineering aptitude.
UPSC Conducts engineering services to recruit engineering graduates in various technical departments every year. From 2017onwards UPSC has included editional filter in the recruitments process for the candidates that tests them in engineering aptitude. ACE Engineering Academy, through its expertise has been in the forefront in training the candidates, giving them the critical tool of competence to get competitive advantage and perform better and excel in their career. One of the topics in engineering aptitude, “Ethics and Values in Engineering profession”, was conceived and curriculum delevopled to train the candidates. It is matter of satisfaction and pride that some of the practice questions and discussions held in the classroom teaching appeared in the ESE question papers.ACE is proud of its impactful and effective traning system that gave comfort and confidence to its candidates in the examination hall. This third edition is next step in pursuit of excellence in making the content further more relevant, comprehensive that can catalyze the performance of the candidates in the UPSC examination. Redundancy is at its minimum by way of providing all the relevant information in one place in this edition. Context fitting examples, illustrations, case studies and pictorial representation of some abstract concepts are some of the hallmarks incorporated in this edition. Some of the case studies and illustrations that were discussed in the classrooms have been incorporated in this book with the aim of making these discussions available to the candidates who cannot make it to classrooms. Authors are of the firm conviction that students would enjoy not only reading this new book but also content relevant practice questions included in the career. This edition is markedly different from previous editions with content relevant practice questions included in the appropriate places. Another deviation of this edition from previous editions is inclusion of previous ESE questions.
Authors have attempted sincerely to make this edition as error free as possible. Still some inadvertent mistakes could crept in but these are purely unintentional. Authors welcome any mistakes observed in this book. Authors thank all the support staff who have rendered their services in shaping this book to be as qualitative as possible.
I would like to welcome you all to yet another noteworthy effort by ACE engineering Publications for engineering Services aspirants to learn understand and appreciate the subject General Principles of Design Drawing and Importance of Safety.
A product may be anything from a software product to Mechanical, Civil, Electrical, Electronics or any other. Every Engineering student should know the various steps involved in the design process right from identification of customer requirement to product launch. Engineering Drawing is the communication to transfer the design content to manufacturing team. Everyday in the news papers we are seeing, how the workers/stake holders are suffering due to violation/ignorance of safety norms. We have to appreciate the initiative taken by the UPSC in the regard so that the engineers will have some basic knowledge of design drawing and safety.
The concepts and questions are keeping in view the model paper prelims of ESE 2017 & ESE 2018 by the UPSC for revised pattern of ESE. Suggestions by the readers are invited for the improvement in our future editions.
With Best wishes to all the students
This Book is intended to help students to prepare for the topic Information communication Technologies’ included as part of general studies and engineering Aptitude for ESE revised Pattern.
ICT is the technology required for information processing in particular, the use of electronic computers, communication devices and software applications to convert, store, protect, process, transmit and retrieve information from anywhere anytime.
To understand ICT, we have to understand basics of concepts (chapter 1).
How to transfer information from one place to another (chapter 2) and it’s security.
Information can be transferred in several ways. Radio, television, cellular technology (chapter 3) and satellite communication (chapter 4)
Appropriate governance is key to the successful (and cost effective) development of technology within any organisation. (Chapter -5)
ICT in education is any technology that deals with the exchange of information or in other words communication in the teaching learning process. i.e.., Technology Based Education (chapter -6)
The concepts and question are prepared keeping in view the model paper released by the UPSC for revised pattern of ESE . Suggestions by the readers are invited for the improvement in our future editions.
ESE-2019 Prelims Standards & Quality Practices in Production, construction, Maintenance and Services₹ 100
I would like to welcome you all to yet another net worthy effort by ACE engineering publications for engineering services aspirants to learn, understand and appreciate the subject and quality practices in Production, construction Maintenance and services.
The key factors that are responsible for survival and performance excellence of any industry are customer satisfaction and return on the capital invested. This applies to both manufacturing and service sectors. To avoid intra country and inter country comparisons for products in the market, there arises a need for uniformity in standards, established codes and procedures for meeting customer expectations. Hence the standards and quality practices play an important ole. For this requirement to be met ISO is ensuring equality in the standards of products and services.
ISO is striving relentlessly to institute quality policies to shape the behaviour and establish core values in an organisation and therefore contribute to corporate policy, control charts. Acceptance sampling systems, continuous improvement techniques are used by every organisation throughout the world to improve product quality service quality and reduce cost. The most effective use of these techniques depends upon they being understood by production and inspection supervisors by engineers and by managements.
Rules and regulations for improving quality in all disciplines was documented by quality guru’s in the quality philosophers, which are advocated throught out the world.
We tired our level best in the first attempt to give the best possible theory with relevant objective questions. You know there is no end for the best . It is process. We welcome the suggestions by readers with respect to content and questions. Any mistakes typographical/others may please be brought to the notice of us, for which we will be grateful to you.